Panel Lamp Repair | Bruening Glass Works

Bruening Glass Works - repairing crystal for over 100 years

20157 Lake Road
Rocky River, Ohio 44116
800.648.3050
mak917@aol.com

Archive for the ‘Panel Lamp Repair’ Category

Beveled Bent Glass Light Repair

broken bent beveled panel

Out door light with four broken curved beveled glass pieces . The hard part is the metal it got bent when the large piece of ice fell and hit the light. First with a hammer and a piece of wood I repair the metal . On to the glass I made a mold and bent 1/4 inch glass to the pattern needed .Test fit each piece then hand beveled each glass panel. Installed the new beveled bent glass panels and gave the light a bath.

Ice damaged metal

bent glass test fit

Hand bevel glass panel

Polish bevel and install

Tags: Antique Glass Repair

Pairpoint Lamp repair

Monday, March 16th, 2009 Posted in All Repair Projects, Antique lamp repair, Chandelier Repair, Glass Globe, Glueings, Panel Lamp Repair, Uncategorized | No Comments »

This beautiful painted pairpoint shade had a crack running down from the top .

Pairpoint reverse painted shade with crack

Repaired Shade

Tags: Antique Crystal repair, Antique Glass Repair, Broken Glass Glued, Chipped Crystal Repair, Crystal Restoration, Glueing Glass

Carriage Fire Engine Lamp Repair

Saturday, February 28th, 2009 Posted in All Repair Projects, Antique lamp repair, Beveled Glass, Beveled glass lens, Blowen Glass Replacements, Glass Globe, Panel Lamp Repair, clock glass | No Comments »

Before and after beveled flashed glass lens with engraving

I was told this is from a fire engine . Its is made of flashed red glass and has a beveled edge and a number six engraved on it. Flash glass is made by layering two colored glasses together in this case red and clear. I have restored many carriage lamps over the years I wish I had photographed them now. I also make globes for oil lamp like on the railroad.

Tags: antique glass lens, Beveled glass lens, Glass Parts, oil lamp repair

Bent Glass Curved Glass Light

Tuesday, November 11th, 2008 Posted in All Repair Projects, Bent Glass, Panel Lamp Repair | No Comments »

Replacement bent glass for a new light fixture .We were faced with the challenge of repairing this broken bent flashed glass panel . We were able to make a custom mold from the origanal and successfully bent a new piece and happily ship it back to the costomer. The cuved glass was not a true radius and the glass was white flashed with a forsted ( sand blasted ) texture. See below for the photos.